Detail Fluke Networks TS19 Test Set, 02151176451
Fluke Networks TS19 Test Set, 081908101888
Product Description
The Fluke Networks TS19 telephone test set, available with various line cord connectors to suit specific applications, is designed for in-house testing of telephone lines to detect dial tone and polarity, make and receive calls, monitor lines without disrupting service, and redial the last number called up to 18 digits, retaining the number for up to 15 minutes after disconnecting from a working telephone line. The test set provides tone or pulse operation and can be used to locate short and open circuits, and to verify continuity. It has an LED that lights red to indicate line polarity, and passes a 1m drop test. The keypad has 12 standard dialing keys including star and pound, and a three-position slide switch allows selection of HI-Z mode for high-impedance monitoring without disrupting service, ring mode for low-impedance monitoring and detecting ringing voltage, and talk mode for dialing and talking. A belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines.
Specifications
Loop limit 2.4k© maximum at 48VDC; 15mA minimum loop current ( nominal)
DC resistance ( talk mode) 150© typical at 80mA current
AC impedance ( monitor mode) Low impedance ( ring position) : 600© at 1kHz ( typical) ; high impedance ( Hi-Z position) : 100k© minimum at 1kHz
Rotary dial pulse rate 10 + 0.5 pulses per second
DTMF ( dual-tone multi-frequency) tone frequency error + or – 1% maximum
Memory capacity Last number redial
Agency certifications and standards met CE ( European Conformity) marking; Canadian Standards Association CAN/ CSA-C22.2 No. 60950-1-03, CAN/ CSA-C22.2 No. 1010.1-92, and CSA-C22.2 No. 1010.1B-97; UL/ ANSI ( Underwriters Laboratories/ American National Standards Institute) 3111-1
Power source Shared line power
Dimensions 22.2 x 8.57 x 6.03cm/ 8.75 x 2.375 x 2.375 inches ( H x W x D)
Weight 0.307kg/ 10.8oz.
* H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Datacom and telecom installation and test devices, such as toners and test sets, check cabling and wiring to help ensure proper connections and operation. Tone generator and probe sets, also called toners, are used to locate, trace, and isolate cables in copper media networks. Telephone test sets, also called butt sets, are specialized telephones that connect to telephone lines to check for proper operation and to isolate trouble. Some test sets incorporate a TDR ( time-domain reflectometer) and toner for determining cable length and locating faults. While certain devices may be used on live networks, others are only suitable for inactive networks. Field technicians and installers use these devices to set up, maintain, and troubleshoot datacom and telecom cabling within a building or in outside plant ( OSP) applications.
Fluke Networks, a division of Fluke Corporation, manufactures tools and software for network deployment, performance management, and troubleshooting. The company, founded in 1992, is headquartered in Everett, WA.
What' s in the Box?
Fluke Networks TS19 test set
Instructions
PUTRABUANA INSTRUMENTS | BUANA SURVEY JAKARTA 0217321129
JL. MUCHTAR RAYA NO. 1D, KREO - CILEDUG 15156
CP : IRFAN 081908101888
T : 0217321129 F : 0217302811 M : 081908101888
Tampilkan Lebih Banyak